Code Alarm CR3 Manuale Utente Scaricare il pdf (Pagina 8)

PROGRAM CODE

The program code is the highest level programming menu. From here, the different func

tions of the ARU can be selected using the program code. Use the codes found here in con

junction with the programming manual for the B1225.

PROGRAM CODES ARE:

# X 1 ÝÝ : SITE ID AND ALARM VOICE MESSAGES FOR EXPANDER X

# X 4 ÝÝ : DTMF ON/OFF SIGNALING TAGS FOR EXPANDERX

# X 5 ÝÝ : ALARM DELAY TIME FOR EXPANDER X

# X 6 ÝÝ : ALARM FORMAT FOR EXPANDER X

# X 8 ÝÝ : RELAY CONTROL TAGS FOR EXPANDER X

# X 9 ÝÝ : RELAY FORMAT FOR EXPANDER X

Each of these codes is described in the following:

#X1ÝÝ : VOICE MESSAGES

The site identifier and each of the 8 alarm inputs are programmed for the expander in this

section. The alarm messages are identified as X.1 to X.8 instead of 1 to 8 in the master

B1225.

An un-programmed voice message will be heard as a loud static noise. DO NOT hold the

telephone directly to your ear when programming these messages for the first time.

Example: You want to program the site identifier in the first expander to say

“Delta Compressor”

ARU: ENTER PROGRAM CODE

YOU: # 1 ÝÝ (selecting voice message)

ARU: NUMBER 1 SITE IS EMPTY

YOU: ÝÝ (selecting change)

ARU: BEEP - (record light comes on)

YOU: (speaking) DELTA COMPRESSOR

ARU: NUMBER 1 SITE IS DELTA COMPRESSOR

YOU: ÝÝ

ARU: ALARM NUMBER 1.1 IS EMPTY (on to the alarm messages)

#X4ÝÝ : DTMF ON/OFF SIGNALLING TAGS

The DTMF on and off strings will be programmed for the expander specified. As in the

voice message programming section, the expander and alarms will be announced as X.1 to

X.8. For complete programming refer to the B1225 manual.

Example: You want to program the second input in expander 1 to have a DTMF ON code of

123 and an off code of 456.

ARU: ENTER PROGRAM CODE

YOU: # 1 4 ÝÝ

.................continued

B1225E BARNETT ENGINEERING LTD. PAGE 7

1 2 3 4 5 6 7 8 9 10 11 12

Nessun commento

Code Alarm CR3 Manuale Utente Pagina 8