Code Alarm PHILISHAVE HQ 2810 Manuale Utente Scaricare il pdf

Model CATX110

Programming Guide

The keychain transmitters included with the system have

been pre-programmed at the factory, with each button pre-

assigned to control a specific function of the system.

It is important to remember that during programming, each

individual step of the procedure must be executed within 15

seconds of the previous step.

When the 15 second time limit is allowed to expire, the

system will automatically terminate the programming mode.

This is indicated by a long chirp from the siren.

Additionally, the system will store codes from up to 4

different transmitters. If a 5

transmitter is programmed to

any receiver channel, then the first transmitter programmed

to that channel will be erased from the system’s memory.

To program new or additional transmitters, the alarm must

be disarmed and the valet switch must be in the OFF

position:

1. Enter the vehicle, and turn the ignition key to the ON

position.

2. Flip the valet switch ON then OFF 3 times

3. The dash LED will flash one time, and the sounding

device will beep one time, indication the system is ready to

accept programming for receiver channel 1.

4. Press and hold the Arm/Disarm Icon button until the

sounding device emits a long beep, indicating the signal

has been stored into memory.

5. If you have additional transmitters (up to 4) that need to

be programmed, repeat step 4 for each transmitter.

1 2

Model CATX110 1

Sommario

Pagina 1 - Model CATX110

Model CATX110Programming GuideThe keychain transmitters included with the system havebeen pre-programmed at the factory, with each button pre-assigned

Pagina 2

Changing the Remote Control BatteryThe 12-volt alkaline battery supplied in your remote transmitter should lastapproximately one year, depending on us

Commenti su questo manuale

Nessun commento

Code Alarm PHILISHAVE HQ 2810 Manuale Utente

Navigare online o scaricare Manuale Utente per Componenti per dispositivi di sicurezza Code Alarm PHILISHAVE HQ 2810. Code Alarm PHILISHAVE HQ 2810 User's Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Componenti per dispositivi di sicurezza Code Alarm PHILISHAVE HQ 2810