Code Alarm CR3 Manuale Utente Scaricare il pdf (Pagina 24)

V002450_25_CR1200-CR2-CR3-CR2500-CR3500_Interface_Configuration_Document_CLIENT.docx

2011-04-27 Page 24 of 65

•

14870 S. Pony Express Rd., Suite 200, Bluffdale, UT 84065

•

(801) 495-2200

•

FAX (801) 495-0280

Reg

Setting Name

Default (hex)

Comment

No Wait USB

(usbKbEnumNotWaitForSet

ReportLed)

0: Default mode, declare enumeration after receive set LED

status report

1: Declare enumeration after receive get report descriptor

command. Used for some Windows CE based devices

Special case for USB enumeration that doesn’t require Host

keyboard response

Note: Supported in firmware version 2362+

Always Enable Auto White

Balance

(alwaysEnableAwb)

0: Disable

1: Enable

Auto White Balance

Note: Supported in firmware version 2378+

Note: Requires power cycle before taking effect.

kbSendDelay_kbClocks

Each keyboard clock period is 40 microseconds.

Note: Supported in firmware version 2378+

Reader Packet Format

(commProtocol)

0: Reserved

1: Raw

2: Packet mode

3: Reserved

Keyboard Inter-Message

Delay

(kbInterMessageDelay_ms)

Valid Range: 0 to 7FFFFFFF Milliseconds

Delay between each keyboard data transmit in the unit of

milliseconds

Note: Supported in firmware version 2378+

NEC 2 of 5 Symbology

(nec2of5Options )

Binary Dip Switch

Bit

Controls

Value

0 NEC 2 of 5 Decoding

0: Disable

1: Enable

1 Checksum checking

0: Disable

1: Enable

2 Strip checksum from the result

0: Disable

1: Enable

3 1 Digit Symbol Allowed

0: Disable

1: Enable

4 2 Digit Symbol Allowed

0: Disable

1: Enable

Note: All symbol lengths greater than 2 are always enabled

when NEC 2 of 5 Decoding is enabled.

Note: Supported in firmware version 2378+

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 64 65

Commenti su questo manuale

Nessun commento

Code Alarm CR3 Manuale Utente Pagina 24

Commenti su questo manuale